Brocade Communications Systems 6510 Installation Guide download pdf (Page 30)

• Two Ethernet Port LEDs (both green)

• The serial console port LEDs do not light up at any time, even when a cable is inserted and the link

is active.

• One bicolor (green/amber) port status LED for each port on the switch. These LEDs are arrayed

above each pair of Fibre Channel ports.

• One power supply/fan assembly LED on each power supply on the non-port side of the switch

LED locations

The following figure shows the port side of the Brocade 6510. The port status LEDs for the FC ports

are arranged left and right to correspond to the upper and lower ports in each pair. Refer to Port side

of the Brocade 6510 on page 14 for the locations of the FC ports.

FIGURE 5 LEDs on Port Side of Brocade 6510

1. System power LED

2. System status LED

3. Ethernet port activity LED

4. Ethernet port speed LED

5. FC port status LED (port 0)

6. FC port status LED (port 4)

7. FC port 4

8. FC port 0

NOTE

The two LEDs on the serial console port are non-functional.

The following figures show the LEDs on the non-port side of the switch.

LED locations

30 Brocade 6510 Hardware Installation Guide

53-1002174-10

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

No comments

Brocade Communications Systems 6510 Installation Guide Page 30