Brocade Communications Systems 6510 Installation Guide download pdf (Page 35)

Transceivers are keyed so that they can only be inserted with the correct orientation. If a transceiver

does not slide in easily, ensure that it is correctly oriented.

2. Position a cable so that the key (the ridge on one side of the cable connector) is aligned with the slot

in the transceiver. Insert the cable into the transceiver until the latching mechanism clicks.

Cables are keyed so that they can be inserted in only one way. If a cable does not slide in easily,

ensure that it is correctly oriented. Do not insert a cable intended for an mSFP transceiver into a

regular SFP or SFP+ transceiver. You may damage the cable. Do not force a standard SFP-type

cable into an mSFP transceiver. You may damage the transceiver.

NOTE

Each SFP+ has a 10-pad gold-plated PCB-edge connector on the bottom. The correct position to insert

an SFP+ into the upper row of ports is with the gold edge down. The correct position to insert an SFP+

into the lower row of ports is with the gold edge up.

FIGURE 8 Installing a 16 Gbps SFP+ in the upper row of port slot

Brocade 6510 Operation

Brocade 6510 Hardware Installation Guide 35

53-1002174-10

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 65 66

No comments

Brocade Communications Systems 6510 Installation Guide Page 35