Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 111
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ServerIron ADX Advanced Server Load Balancing Guide 99
53-1002435-01
High availability designs with TCS
2
ServerIronADX(config)# ip l4-policy 1 cache tcp 0 global
ServerIronADX(config)# ip l4-policy 2 cache udp 0 global
ServerIronADX(config)# ip l4-policy 3 cache tcp mms global
ServerIronADX(config)# ip l4-policy 4 cache tcp rtsp global
ServerIronADX(config)# ip l4-policy 5 cache tcp pnm global
ServerIronADX(config)# ip l4-policy 6 cache tcp http global
ServerIronADX(config)# interface ethernet 1/22
ServerIronADX(config-if-1/22)# ip address 172.32.1.1 255.255.255.0
ServerIronADX(config-if-1/22)# exit
Layer 3 active-active TCS configuration
Figure 27 illustrates an active-active TCS configuration.
FIGURE 27 Active-active TCS configuration
Commands for ServerIron ADX A
The following commands configure ServerIron ADX A in Figure 27.
ServerIronADX(config)# vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)# exit
ServerIronADX(config)# vlan 100 by port
ServerIronADX(config-vlan-100)# untagged ethe 1/1 to 1/4
ServerIronADX(config-vlan-100)# router-interface ve 1
ServerIronADX(config-vlan-100)# exit
ServerIronADX(config)# vlan 200 by port
ServerIronADX(config-vlan-200)# untagged ethe 1/5 to 1/7
ServerIronADX(config-vlan-200)# router-interface ve 2
ServerIronADX(config-vlan-200)# exit
ServerIronADX(config)# vlan 500 by port
ServerIronADX(config-vlan-500)# untagged ethe 1/8 to 1/12
ServerIronADX(config-vlan-500)# router-interface ve 3
ServerIronADX(config-vlan-500)# exit
195.92.20.102
Internet
195.92.20.104
untag e 1/1-1/4
ve 1
10.10.20.3
ServerIron B
SI
untag e 1/5-1/7
ve 2
10.10.10.3
195.92.20.102
Internet
SI
195.92.20.104
195.92.20.1
10.10.20.2
Port e7
Port e1
Router
untag ve 1
10.10.20.1
untag e 1/1-1/4
ve 1
untag e 1/5-1/7
ve 2
10.10.10.1
ServerIron A
195.92.10.1
10.10.10.2
Port e3
Port e1
Router
Client
Client
195.92.10.102
195.92.10.103
Port e3
untag e 1/1-1/4
ve 1
10.10.20.3
ServerIron B
SI
untag e 1/5-1/7
ve 2
10.10.10.3
ve 3
3.3.3.3
Router
Port e3
Port e5
Port e1
ve 1
3.3.3.2
ve 3
3.3.3.1
Cache3
3.3.3.22
Port e7
ve 1
VRRP-E on 10.10.20.10
VRRP-E on 10.10.10.10
VRRP-E on 3.3.3.10
Active-Active Link
Port e22
172.32.1.1
- ServerIron ADX 1
- Document History 2
- Contents 5
- About This Document 9
- Command syntax conventions 10
- Notice to the reader 11
- Related publications 11
- Web access 12
- E-mail and telephone access 12
- SIP Server Load Balancing 13
- SIP terminology 16
- SIP message headers 17
- Max-Forwards 18
- Sample deployment topologies 19
- RINGING F4 21
- Configuring SIP SLB 23
- Configuring health check 26
- Example 29
- Load Balancing SIP over TCP 31
- Call-ID3 33
- Call-ID1 34
- Rehashing the SIP hash table 38
- Debug commands 40
- SIP SLB command reference 42
- Sample configuration 43
- Transparent Cache Switching 45
- Stateful caching 47
- Sample Deployment Topologies 48
- TCS with spoofing 49
- TCS with destination NAT 49
- TCS with Source NAT 50
- VIPs with reverse proxy 51
- Configuring TCS 52
- Defining a cache server 53
- Enabling TCS 56
- Other TCS options 57
- Cache Route Optimization 58
- Enabling Destination NAT 62
- Configuring Source NAT 62
- Examples 64
- Distribution algorithm 66
- • Maximum connection rate 72
- Enabling FastCache 73
- Enabling remote cache 73
- Shutting down a cache server 74
- Passive FTP for TCS 75
- Traffic flow of passive FTP 76
- Topologies supported 76
- High availability support 77
- ServerIron ADX 2 78
- Policy based caching 79
- Show commands 81
- Content aware cache switching 82
- Setting up the CSW policies 84
- Configuring the cache servers 85
- This field... Displays 91
- Displaying cache information 95
- TCS information (Continued) 96
- Sample configurations 98
- Applying IP policies 99
- Defining the caches 99
- Defining the cache groups 100
- 53-1002435-01 101
- Policy-based caching 102
- Asymmetric TCS (FastCache) 103
- Policy-based cache failover 105
- TCS with reverse proxy 107
- Layer 3 TCS 109
- Basic TCS configuration 110
- Commands for ServerIron ADX A 111
- Commands for ServerIron ADX B 112
- Internet 114
- 10.10.20.104 114
- 10.10.20.102 114
- Router NI1 117
- Router NI2 117
- OSPF Area 0 117
- Commands for Router NI2 121
- Active-standby TCS 125
- Configuring Router R1 126
- Configuring ServerIron ADX A 126
- Configuring ServerIron ADX B 127
- NetCache servers 128
- NetCache C720 cache server 128
- TABLE 9 Hashing methods 130
- Parsing the host string 133
- Force rehash 136
Related products and manuals for Network switches Brocade Communications Systems ServerIron ADX 12.4.00
(30 pages)© 2020, manymanuals.com. All rights reserved. | 2.153 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals