Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 118
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
106 ServerIron ADX Advanced Server Load Balancing Guide
53-1002435-01
High availability designs with TCS
2
NetIron(config)# vlan 23 by port
NetIron(config-vlan-23)# untagged ethe 23
NetIron(config-vlan-23)# exit
NetIron(config)# interface ve 1
NetIron(config-ve-1)# ip address 172.1.1.3 255.255.255.0
NetIron(config-ve-1)# ip ospf area 0
NetIron(config-ve-1)# ip vrrp-extended vrid 3
NetIron(config-ve-1-vrid-3)# backup
NetIron(config-ve-1-vrid-3)# ip-address 172.1.1.1
NetIron(config-ve-1-vrid-3)# track-port e 1
NetIron(config-ve-1-vrid-3)# track-port e 2
NetIron(config-ve-1-vrid-3)# track-port e 8
NetIron(config-ve-1-vrid-3)# enable
NetIron(config-ve-1)# ip vrrp-extended vrid 4
NetIron(config-ve-1-vrid-4)# backup
NetIron(config-ve-1-vrid-4)# ip-address 172.1.1.2
NetIron(config-ve-1-vrid-4)# track-port e 1
NetIron(config-ve-1-vrid-4)# track-port e 2
NetIron(config-ve-1-vrid-4)# track-port e 8
NetIron(config-ve-1-vrid-4)# enable
NetIron(config-ve-1)# exit
NetIron(config)# interface ve 2
NetIron(config-ve-2)# ip address 10.2.24.1 255.255.255.0
NetIron(config-ve-2)# ip ospf area 0
NetIron(config-ve-2)# exit
NetIron(config)# interface ethernet 23
NetIron(config-if-23)# ip address 173.1.1.1 255.255.255.0
NetIron(config-if-23)# exit
NetIron(config)# ip route 0.0.0.0 0.0.0.0 10.2.24.254
NetIron(config)# ip router-id 10.2.24.1
NetIron(config)# router vrrp-extended
NetIron(config)# router ospf
NetIron(config-ospf-router)# area 0
NetIron(config-ospf-router)# redistribution connected
NetIron(config-ospf-router)# redistribution static
NetIron(config-ospf-router)# exit
Commands for ServerIron ADX 254
The following commands configure ServerIron ADX 254 in Figure 29.
ServerIronADX(config)# vlan 1 name DEFAULT-VLAN by port
ServerIronADX(config-vlan-1)# router-interface ve 1
ServerIronADX(config-vlan-1)# exit
ServerIronADX(config)# vlan 2 by port
ServerIronADX(config-vlan-2)# untagged ethe 3/1 ethe 3/3 ethe 4/1 ethe 4/3
ServerIronADX(config-vlan-2)# router-interface ve 2
ServerIronADX(config-vlan-2)# exit
ServerIronADX(config)# vlan 16 by port
ServerIronADX(config-vlan-16)# untagged ethe 3/16
ServerIronADX(config-vlan-16)# static-mac-address 00e0.5212.3400 ethernet 3/16
ServerIronADX(config-vlan-16)# exit
ServerIronADX(config)# vlan 999 by port
ServerIronADX(config-vlan-999)# untagged ethe 3/24
ServerIronADX(config-vlan-999)# exit
ServerIronADX(config)# interface ve 1
ServerIronADX(config-ve-1)# ip address 100.1.1.252 255.255.255.0
ServerIronADX(config-ve-1)# ip vrrp-extended vrid 5
ServerIronADX(config-ve-1-vrid-5)# backup
ServerIronADX(config-ve-1-vrid-5)# ip-address 100.1.1.254
ServerIronADX(config-ve-1-vrid-5)# track-port e 3/1
- ServerIron ADX 1
- Document History 2
- Contents 5
- About This Document 9
- Command syntax conventions 10
- Notice to the reader 11
- Related publications 11
- Web access 12
- E-mail and telephone access 12
- SIP Server Load Balancing 13
- SIP terminology 16
- SIP message headers 17
- Max-Forwards 18
- Sample deployment topologies 19
- RINGING F4 21
- Configuring SIP SLB 23
- Configuring health check 26
- Example 29
- Load Balancing SIP over TCP 31
- Call-ID3 33
- Call-ID1 34
- Rehashing the SIP hash table 38
- Debug commands 40
- SIP SLB command reference 42
- Sample configuration 43
- Transparent Cache Switching 45
- Stateful caching 47
- Sample Deployment Topologies 48
- TCS with spoofing 49
- TCS with destination NAT 49
- TCS with Source NAT 50
- VIPs with reverse proxy 51
- Configuring TCS 52
- Defining a cache server 53
- Enabling TCS 56
- Other TCS options 57
- Cache Route Optimization 58
- Enabling Destination NAT 62
- Configuring Source NAT 62
- Examples 64
- Distribution algorithm 66
- • Maximum connection rate 72
- Enabling FastCache 73
- Enabling remote cache 73
- Shutting down a cache server 74
- Passive FTP for TCS 75
- Traffic flow of passive FTP 76
- Topologies supported 76
- High availability support 77
- ServerIron ADX 2 78
- Policy based caching 79
- Show commands 81
- Content aware cache switching 82
- Setting up the CSW policies 84
- Configuring the cache servers 85
- This field... Displays 91
- Displaying cache information 95
- TCS information (Continued) 96
- Sample configurations 98
- Applying IP policies 99
- Defining the caches 99
- Defining the cache groups 100
- 53-1002435-01 101
- Policy-based caching 102
- Asymmetric TCS (FastCache) 103
- Policy-based cache failover 105
- TCS with reverse proxy 107
- Layer 3 TCS 109
- Basic TCS configuration 110
- Commands for ServerIron ADX A 111
- Commands for ServerIron ADX B 112
- Internet 114
- 10.10.20.104 114
- 10.10.20.102 114
- Router NI1 117
- Router NI2 117
- OSPF Area 0 117
- Commands for Router NI2 121
- Active-standby TCS 125
- Configuring Router R1 126
- Configuring ServerIron ADX A 126
- Configuring ServerIron ADX B 127
- NetCache servers 128
- NetCache C720 cache server 128
- TABLE 9 Hashing methods 130
- Parsing the host string 133
- Force rehash 136
Related products and manuals for Network switches Brocade Communications Systems ServerIron ADX 12.4.00
(30 pages)© 2020, manymanuals.com. All rights reserved. | 3.398 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals