12 ServerIron ADX Advanced Server Load Balancing Guide
53-1002435-01
Configuring SIP SLB
1
• sip-proxy-server— Identifies the server as SIP proxy server.
• health-check-method— specifies the SIP health check method.
• options— enables health check through OPTION messages.
• register— enables health check through REGISTER messages (default method).
• health-check-no-dsr— specifies for health check to be sent to a real server rather than a
virtual server.
Configure a SIP registrar server and enable health check
Follow the steps given below to configure real SIP registrar server and its health check.
1. Configure a real server and IP address for a registrar server and enter the real-server
configuration mode.
ServerIronADX(config)# server real registrar-1 1.1.5.1
Syntax: [no] server real <name> <ip address>
2. Specify the SIP port.
ServerIronADX(config-rs-registrar-1)#port sip
Syntax: [no] port sip
3. Specify a registrar and a health-check with no DSR. In this scenario, health-check messages
are sent directly to a real server IP address.
ServerIronADX(config-rs-registrar-1)#port sip sip-registrar
health-check-no-dsr
Syntax: port sip [sip-registrar] [health-check-method register|options] [health-check-no-dsr]
• sip-registrar— Identifies the server as SIP registrar.
• health-check-method— specifies the SIP health check method.
• options— enables health check through OPTION messages.
• register— enables health check through REGISTER messages (default method).
• health-check-no-dsr— specifies for health check to be sent to a real server rather than a
virtual server.
Configure a SIP proxy plus registrar server and enable health check
Follow the steps given below to configure real SIP proxy/registrar server and its health check.
1. Configure a real server name and IP address for a registrar/proxy server and enter the real
server configuration mode.
ServerIronADX(config)# server real registrar-proxy-server-5 1.1.9.5
Syntax: [no] server real <name> <ip address>
2. Specify the SIP port.
ServerIronADX(config-rs-registrar-proxy-server-5)# port sip
Syntax: [no] port sip
Comments to this Manuals