Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 42
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
30 ServerIron ADX Advanced Server Load Balancing Guide
53-1002435-01
SIP SLB command reference
1
SIP SLB command reference
This section describes the syntax and usage for each SIP Server Load Balancing command in the
following modes:
• “Port sip (real server configuration mode)”
• “Port sip (virtual server configuration mode)”
Port sip (real server configuration mode)
Use the port sip command in the real server or virtual server configuration mode to configure a
proxy, redirect, registrar, or registrar-proxy server.
Syntax: port sip {sip-redirect-server | sip-proxy-server | sip-registrar |
sip-both-registrar-proxy-server} [health-check-method [options | register]] |
health-check-no-dsr]
• sip-redirect-server— Identifies the server as SIP redirect server.
• sip-proxy-server— Identifies the server as SIP proxy server.
• sip-registrar— Identifies the server as SIP registrar.
ServerIronADX4/2 # show sip debug packet-trace 172.28.8.67 172.28.8.100
4/2 #
->Start processing Incoming Flow [172.28.8.67:3798->172.28.8.100:5060] Data len
[1460]...
Start SIP Parsing for chain len [1460]...
SIP header parsing for flow COMPLETED with sip header - orig chain len [1460]
SIP packet header dump:
Packet type: INVITE
URI: sip:[email protected]:5060 version: SIP/2.0 response code: 0
parse completed: 1 num pkts processed: 1 method: INVITE
VIA header: SIP/2.0/TCP 172.28.8.67:5060;branch=z9hG4bKnashds8
Max forward: 70
Call ID: [email protected]
Cseq: 1 INVITE
Top branch id: z9hG4bKnashds8
Top Sent By: 172.28.8.67 Top Sent By Port: 5060
In sip_process_incoming_frontend_request...
…
Current transaction: branch [z9hG4bKnashds8] client[172.28.8.67]
Forwarding request from flow [172.28.8.67:3798->172.28.8.100:5060] to Server
[172.28.8.155:5060->172.28.8.67:3798]
- ServerIron ADX 1
- Document History 2
- Contents 5
- About This Document 9
- Command syntax conventions 10
- Notice to the reader 11
- Related publications 11
- Web access 12
- E-mail and telephone access 12
- SIP Server Load Balancing 13
- SIP terminology 16
- SIP message headers 17
- Max-Forwards 18
- Sample deployment topologies 19
- RINGING F4 21
- Configuring SIP SLB 23
- Configuring health check 26
- Example 29
- Load Balancing SIP over TCP 31
- Call-ID3 33
- Call-ID1 34
- Rehashing the SIP hash table 38
- Debug commands 40
- SIP SLB command reference 42
- Sample configuration 43
- Transparent Cache Switching 45
- Stateful caching 47
- Sample Deployment Topologies 48
- TCS with spoofing 49
- TCS with destination NAT 49
- TCS with Source NAT 50
- VIPs with reverse proxy 51
- Configuring TCS 52
- Defining a cache server 53
- Enabling TCS 56
- Other TCS options 57
- Cache Route Optimization 58
- Enabling Destination NAT 62
- Configuring Source NAT 62
- Examples 64
- Distribution algorithm 66
- • Maximum connection rate 72
- Enabling FastCache 73
- Enabling remote cache 73
- Shutting down a cache server 74
- Passive FTP for TCS 75
- Traffic flow of passive FTP 76
- Topologies supported 76
- High availability support 77
- ServerIron ADX 2 78
- Policy based caching 79
- Show commands 81
- Content aware cache switching 82
- Setting up the CSW policies 84
- Configuring the cache servers 85
- This field... Displays 91
- Displaying cache information 95
- TCS information (Continued) 96
- Sample configurations 98
- Applying IP policies 99
- Defining the caches 99
- Defining the cache groups 100
- 53-1002435-01 101
- Policy-based caching 102
- Asymmetric TCS (FastCache) 103
- Policy-based cache failover 105
- TCS with reverse proxy 107
- Layer 3 TCS 109
- Basic TCS configuration 110
- Commands for ServerIron ADX A 111
- Commands for ServerIron ADX B 112
- Internet 114
- 10.10.20.104 114
- 10.10.20.102 114
- Router NI1 117
- Router NI2 117
- OSPF Area 0 117
- Commands for Router NI2 121
- Active-standby TCS 125
- Configuring Router R1 126
- Configuring ServerIron ADX A 126
- Configuring ServerIron ADX B 127
- NetCache servers 128
- NetCache C720 cache server 128
- TABLE 9 Hashing methods 130
- Parsing the host string 133
- Force rehash 136
Related products and manuals for Network switches Brocade Communications Systems ServerIron ADX 12.4.00
(30 pages)© 2020, manymanuals.com. All rights reserved. | 1.363 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals