Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual download pdf (Page 43)

ServerIron ADX Advanced Server Load Balancing Guide 31

53-1002435-01

SIP SLB command reference

• sip-both-registrar-proxy-server— Identifies the server as an SIP registrar or a proxy server.

• health-check-method— specifies the SIP health check method.

• options— enables health check through OPTION messages.

• register— enables health check through REGISTER messages (default method).

• health-check-no-dsr— specifies for health check to be sent to a real server rather than a virtual

server.

Usage guidelines

These commands are issued from the real server configuration.

History

The port sip command was introduced in Release 09.4.00.

Port sip (virtual server configuration mode)

Use the port sip command in the virtual server configuration mode to configure sip switch or sip

domain name.

Syntax: port sip sip-switch | sip-domain-name <domain-name>

• sip-switch— Enable SIP switching

• sip-domain-name— Specify SIP domain name

Usage guidelines

The above commands are issued from under virtual server configuration.

History

This command was introduced in Release 09.4.00.

Sample configuration

The following example shows the configuration details for SIP Server Load Balancing.

server real rs1 20.20.20.1

port sip

port sip sip-both-registrar-proxy-server health-check-method register

port sip keepalive

server real rs2 20.20.20.2

port sip

port sip sip-both-registrar-proxy-server health-check-method register

port sip keepalive

server virtual-name-or-ip vs1 10.10.0.100

port sip

port sip dsr

port sip sip-switch

bind sip rs1 sip rs2 sip

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 135 136

No comments

Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 43