Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual download pdf (Page 90)

78 ServerIron ADX Advanced Server Load Balancing Guide

53-1002435-01

Content aware cache switching

state machine to track HTTP request/response transactions. Every HTTP request will be analyzed

and forwarded according to the CSW configuration. When CSW makes a decision to switch from

one server to another server, it will send a TCP reset to the previously chosen server and establish

a TCP connection to the newly selected server

Disabling HTTP Keep Alive mode

HTTP keep-alive mode is the default mode for TCS CSW. You can disable keep-alive to return the

ServerIron ADX to HTTP 1.0 mode which was supported in releases prior to 12.4.00 as shown.

ServerIronADX(config)# server cache-group 1

ServerIronADX(config-tc-1)# no-keep-alive

Syntax: [no] no-keep-alive

Use the no parameter to re-enable HTTP keep alive if you have disabled it.

Displaying HTTP keep alive statistics

You can use the show server proxy keep-alive command to display HTTP keep alive statistics. The

statistics relevant to HTTP keep alive are shown (in bold) in the abbreviated output below and

described in Table 5.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 135 136

No comments

Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 90