Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 16)

Mounting the access point

8 Brocade Mobility 7131N-FGR Access Point Installation Guide

53-1001948-01

Radio 1 or Radio 2 antennae depending on which radio is selected for the scan.

Certain Rogue AP detection features use a radio to perform dual-band scanning. The

dedicated radio should be connected to an appropriate dual-band dipole antenna

(Part No. ML-2452-APA2-01)

R1 defines the access point’s radio 1 antenna connectors and R2 defines radio 2

antenna connectors.

Mounting the access point

The Brocade Mobility 7131N-FGR Access Point can attach to a wall, mount under a

suspended T-Bar or above a ceiling (plenum or attic) following the same installation

instructions. Choose one of the following mounting options based on the physical

environment of the coverage area. Do not mount the access point in a location that

has not been approved in a site survey.

Wall mounting

Wall mounting requires hanging the access point along its width (or length) using

the pair of slots on the bottom of the unit and the access point mounting template

(on the next page) for the screws.

AP7131N_InstallationGuide.book Page 8 Tuesday, August 24, 2010 5:09 AM

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 64 65

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 16