Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 27)

LED indicators

Brocade Mobility 7131N-FGR Access Point Installation Guide 19

53-1001948-01

The access point utilizes two different colored lights below each LED. Only one light

displays within a LED at any given time. Every light within each LED is exercised

during startup to allow the user to see if an LED is non-functional. The LEDs turn on

and off while rotating around in a circle. Since two LEDs feed each light pipe, the

pattern is from left to right, then right to left.

NOTE

The LED blink rate is proportional to activity. The busiest traffic corresponds to the

fastest blink, while the slowest traffic corresponds to slowest blink.

NOTE

Depending on how the 5 GHz and 2.4 GHz radios are configured, the LEDs will blink

at different intervals between amber and yellow (5 GHz radio) and emerald and

yellow (2.4 GHz radio).

The LEDs on the top housing of the access point are clearly visible in wall and below

ceiling installations. The top housing LEDs have the following display and

functionality:

AP7131N_InstallationGuide.book Page 19 Tuesday, August 24, 2010 5:09 AM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 64 65

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 27