Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 33)

Configuring the access point

Brocade Mobility 7131N-FGR Access Point Installation Guide 25

53-1001948-01

A Website Certified by an Unknown Authority screen displays stating Firefox is

unable to define a trusted site.

5. Select either the Accept this certificate permanently or Accept this certificate

temporarily for this session. Click the OK button to continue.

A Security Error: Domain Name Mismatch screen could display. Click OK to

continue. At this point in the browser configuration, a screen displays stating

the Web site’s certificate cannot be verified.

6. Click Yes to continue. The access point’s login screen displays.

7. Log in using admin as the default User ID and admin123 as the default

password. If the default login is successful, the Change Admin Password

window displays. It is strongly recommended you immediately change the

password to optimize device security. For more information, see “Configuring

the access point” on page 25.

Configuring the access point

For the basic setup described in this guide, the Java-based Web UI will be used to

configure the access point. The GE1/POE port’s default setting is static (with a

default IP address of 192.168.0.1). For this example, the access point’s WAN

interface will be used to connect to the access point. The default WAN IP address is

10.1.1.1. For optimal viewing of the Web UI, the screen resolution should be set to

1024 x 768 pixels or greater.

Remember, Internet Explorer and Mozilla Firefox require unique settings be defined

in order for the browser to access the Brocade Mobility 7131N-FGR Access Point

GUI applet. For instructions on configuring these browser settings, see “Configuring

your browser for Brocade Mobility 7131N-FGR Access Point support” on page 23.

NOTE

For advanced configuration options beyond the scope of this guide, refer to the

Broade Mobility 7131 Series Access Point Product Reference Guide. The guide is

available on the Brocade Web site.

AP7131N_InstallationGuide.book Page 25 Tuesday, August 24, 2010 5:09 AM

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 64 65

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 33