Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 35)

Resetting the access point’s password

Brocade Mobility 7131N-FGR Access Point Installation Guide 27

53-1001948-01

Enter the current password and a new admin password in fields provided, and

click Apply. Once the admin password has been updated, a warning message

displays stating the access point could be operating illegally unless set to

operate in the correct country. Proceed to “Configuring basic device settings”

on page 27 to validate the country setting.

NOTE

Though the access point can have its basic settings defined using a number of

different screens, Brocade recommends using the Brocade Mobility 7131N-FGR

Access Point Quick Setup screen to define a minimum required configuration from

one location.

Resetting the access point’s password

The access point has a means of restoring its password to its default value. Doing

so also reverts the access point’s security, radio and power management

configuration to their default settings. Only an installation professional should reset

the access point’s password and promptly define a new restrictive password.

To contact Brocade Support in the event of a password reset requirement, go to

http://www.brocade.com/

CAUTION

Only a qualified installation professional should set or restore the

access point’s radio and power management configuration in the event

of a password reset.

Configuring basic device settings

Configure a set of minimum required device settings within the Quick Setup screen.

The values (LAN, WAN etc.) can often be defined in other locations within the menu

tree. When you change the settings in the Quick Setup screen, the values also

change within the screen where these parameters also exist. Additionally, if the

values are updated in these other screens, the values initially set within the Quick

Setup screen will be updated.

AP7131N_InstallationGuide.book Page 27 Tuesday, August 24, 2010 5:09 AM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 64 65

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 35