Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 48)

Configuring basic device settings

40 Brocade Mobility 7131N-FGR Access Point Installation Guide

53-1001948-01

4. Select the Auto (IKE) Key Exchange checkbox and the IKE Settings button.

IKE provides an automatic means of negotiation and authentication for

communication between two or more entities.

5. Configure all the parameters within the IKE Settings screen.The IKE

Authentication Passphrase must be shared by the external NTP, syslog or

Radius resource.

6. From back within the VPN screen, select the Auto (IKE) Key Exchange checkbox

and the Auto Key Settings button.

Use the Auto Key Settings screen to specify the type of encryption and

authentication used with the tunnel.

7. Configure all the parameters within the Auto Key Settings screen.

8. For additional information on configuring either IKE Settings or Auto Key

Settings, refer to the Brocade Mobility 7131 Series Access Point Product

Reference Guide available at the Brocade Web site.

9. Click Apply to save the configuration of the new tunnel.

External NTP, syslog and Radius resources are now reachable from the access

point’s secure VPN tunnel. However, you must supply the access point with the

IP address of the NTP, syslog or Radius server for the access point to connect

to those external resources. For information on configuring external NTP,

syslog and Radius server support, refer to the Brocade Mobility 7131 Series

Access Point Product Reference Guide available at the Brocade Web site.

Local WAN IP

Enter the WAN’s numerical (non-DNS) IP address in order for the

tunnel to pass traffic to a remote network.

Remote Subnet

Specify the numerical (non-DNS) IP address for the Remote

Subnet.

Remote Subnet Mask

Enter the subnet mask for the tunnel’s remote network for the

tunnel. The remote subnet mask is the subnet setting for the

remote network the tunnel connects to.

Remote Gateway

Enter a numerical (non-DNS) remote gateway IP address for the

tunnel. The remote gateway IP address is the gateway address on

the remote network the VPN tunnel connects to.

AP7131N_InstallationGuide.book Page 40 Tuesday, August 24, 2010 5:09 AM

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 64 65

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 48