Brocade Communications Systems 6510 Service Manual Page 32
- Page / 70
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
20 Monitoring and Alerting Policy Suite Administrator’s Guide
53-1002933-02
MAPS groups overview
4
User-defined groups
In many cases, you need groups of elements that are more suited for your environment than the
predefined groups. For example, small form-factor pluggable (SFP) transceivers from a specific
vendor can have different specifications than SFP transceivers from another vendor. For example,
when monitoring SFP transceivers, you might want to create a seperate group of SFP transceivers
for each separate vendor. In another scenario, some ports may be more critical than others, and so
would be monitored using different thresholds than other ports. A maximum of 64 user-defined
groups and imported flows combined is permitted per logical switch.
NON_E_F_PORTS FC Port All ports in the logical switch which are neither E_Ports nor F_Ports.
ALL_10GSWL_SFP SFP All 10-Gbps SWL SFP transceivers on FC Ports in the logical switch.
ALL_10GLWL_SFP SFP All 10-Gbps LWL SFP transceivers on FC Ports in the logical switch.
ALL_16GSWL_SFP SFP All 16-Gbps Short Wavelength (SWL) SFP transceivers in the logical
switch.
ALL_16GLWL_SFP SFP All 16-Gbps Long Wavelength (LWL) SFP transceivers in the logical switch.
ALL_OTHER_SFP SFP All small form-factor pluggable (SFP) transceivers which do not belong to
one of the following groups:
• ALL_10GSWL_SFP
• ALL_10GLWL_SFP
• ALL_16GSWL_SFP
• ALL_16GLWL_SFP
• ALL_QSFP
ALL_QSFP SFP All quad small form-factor pluggable (QSFP) transceivers in the logical
switch.
ALL_SLOTS Slot All slots present in the chassis.
ALL_SW_BLADES Blade All port and application blades in the chassis.
ALL_CORE_BLADES Blade All core blades in the chassis.
ALL_CIRCUITS Circuit All Fibre Channel over Internet Protocol (FCIP) circuits in the logical switch.
ALL_FAN Fan All fans in the chassis.
ALL_FLASH Flash The flash memory card in the chassis.
ALL_PS Power Supply All power supplies in the chassis.
ALL_TS Temperature
Sensor
All temperature sensors in the chassis.
ALL_WWN WWN All WWN cards in the chassis.
SWITCH Switch Default group used for defining rules on parameters that are global for the
whole switch level, for example, security violations or fabric health.
CHASSIS Chassis Default group used for defining rules on parameters that are global for the
whole chassis, for example, CPU or flash.
TABLE 12 Predefined MAPS groups (Continued)
Predefined group name Object type Description
- Monitoring and Alerting 1
- Policy Suite 1
- Document History 2
- Contents 3
- Chapter 6 MAPS Dashboard 5
- About This Document 7
- Document conventions 8
- Notes, cautions, and warnings 9
- Key terms 9
- Notice to the reader 10
- Additional information 10
- Getting technical help 11
- Document feedback 12
- In this chapter 13
- MAPS overview 13
- MAPS license requirements 14
- 53-1002933-02 15
- MAPS and Flow Vision 17
- Enabling and Configuring MAPS 19
- MAPS configuration tasks 20
- Configuration task Command 21
- MAPS Elements and Categories 23
- Switch Policy Status 24
- Port Health 24
- • The port has gone offline 25
- • The port has come online 25
- • The port is faulty 25
- FRU Health 26
- Security Violations 26
- Fabric State Changes 27
- Switch Resource 27
- Traffic Performance 28
- FCIP Health 29
- MAPS monitoring categories 30
- MAPS groups overview 31
- User-defined groups 32
- Viewing group information 33
- MAPS policies overview 34
- User-defined policies 35
- Fabric Watch legacy policies 35
- Working with MAPS policies 36
- Modifying a policy 37
- Modifying a default policy 37
- MAPS rules overview 38
- MAPS conditions 38
- MAPS actions 39
- RASLog messages 40
- SNMP traps 41
- E-mail alert 41
- Port fencing 41
- Switch critical 42
- Switch marginal 42
- SFP marginal 42
- Creating a rule 42
- Modifying a rule 43
- Cloning a rule 44
- Sending alerts using e-mail 45
- Monitoring flows using MAPS 47
- ATTENTION 49
- MAPS Dashboard 51
- Historical data 52
- Viewing the MAPS dashboard 53
- MAPS dashboard overview 55
- Viewing historical data 56
- Clearing data 58
- Additional MAPS features 61
- Notes on MAPSSAM 62
- MAPS Threshold values 63
- MAPS threshold value tables 64
- Port Monitoring thresholds 64
- FCIP Monitoring thresholds 64
- Fabric Monitoring thresholds 64
- SFP Monitoring thresholds 65
Related products and manuals for Network switches Brocade Communications Systems 6510
(336 pages)© 2020, manymanuals.com. All rights reserved. | 1.970 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals