Brocade Communications Systems StorageWorks 2/16N - FF And 2/16N SAN Switch Service Manual download pdf (Page 13)

Resolved issues 13

• When running with 16:1 oversubscription ratio on a VC-FC module, the hardware registers do not

allow auto-routed traffic for the sixteenth server blade. When this scenario occurs, the firmware

routes FC frames, causing a significant drop in the performance.

The following issues that existed in Virtual Connect 1.15b and earlier versions have been resolved in

Virtual Connect 1.16:

• Server profiles could be assigned to a bay occupied by a non-server device.

• The Virtual Connect GUI labeled all server bays as Bay 0 and failed to recognize any servers in the

enclosure.

• Signal quality for 10GBASE-CX4 cables was poor.

1 2 ... 8 9 10 11 12 13

No comments

Brocade Communications Systems StorageWorks 2/16N - FF And 2/16N SAN Switch Service Manual Page 13