Brocade Communications Systems 8/80 Service Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 62
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
ServerIron Switching and Routing Guide
2 - 12 © 2012 Brocade Communications Systems, Inc. May 2012
The <name> can be up to 16 characters long and can contain blanks
Configuring Another Protocol VLAN
You can create another protocol VLAN on the system. All ports of the switch are by default dynamically assigned
to the newly created VLAN. VLAN Membership can be modified using the dynamic, static, or exclude
commands.
You can use this option to define a protocol-based VLAN for protocols that are not specified as supported protocol
VLANs on a switch or router, or do not require dedicated, separate broadcast domains.
On a 16 port ServerIron, ports 13 through 16 represent protocols Decnet and AppleTalk. You do not need to
separate traffic by protocol into separate broadcast domains. Instead, create an Other Protocol VLAN with just
those ports as members:
ServerIron(config)#other-proto
ServerIron(config-other-proto)#static e13 to 16
ServerIron(config-other-proto)#exclude e1 to 12
ServerIron(config-other-proto)#exit
Syntax: [no] other-proto [<name>]
Dual-Mode VLAN Ports
Configuring a tagged port as dual-mode allows it to accept and transmit both tagged and untagged traffic
simultaneously. A dual-mode port accepts and transmits frames belonging to VLANs configured for the port, as
well as frames belonging to the default VLAN (untagged traffic).
For example, in Figure 2.1, port 2/11 is a dual-mode port belonging to VLAN 20. Traffic for VLAN 20, as well as
traffic for the default VLAN, flows from a hub to this port. The dual-mode feature allows traffic for VLAN 20 and
untagged traffic to go through the port at the same time.
Figure 2.1 Dual-mode VLAN port example
To enable the dual-mode feature on port 2/11 in Figure 2.1 enter the following commands:
ServerIron(config)#vlan 20
ServerIron(config-vlan-20)#tagged e 2/11
ServerIron(config-vlan-20)#tagged e 2/9
ServerIron(config-vlan-20)#int e 2/11
Hub
Port 2/11
Tagged, VLAN 20
dual-mode
Port 2/9
Tagged, VLAN 20
Port 2/10
Untagged
Untagged
Traffic
VLAN 20
Traffic
Untagged
Traffic
VLAN 20
Traffic
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 61 62

Comments to this Manuals

No comments