Brocade Communications Systems Brocade Superx Series Installation Guide Page 71

  • Download
  • Add to my manuals
  • Print
  • Page
    / 188
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 70
Brocade FastIron SX Series Chassis Hardware Installation Guide 59
53-1002500-01
Verifying proper operation
2
10/100/10
00 Ethernet
Port
On – Green A link is established with the
remote port.
Off A link is not established with the
remote port. You can do the
following:
Verify that the connection
to the other device has
been properly made. Also,
make certain that the other
device is powered on and
operating correctly.
Try using a different cable.
10/100/10
00 Ethernet
Port
On or blinking –
Yellow
The port is transmitting and
receiving packets.
Off for an
extended
period
The port is not transmitting or
receiving packets.
You can check the other
10/100/1000 Ethernet port
LED to make sure a link is
established with the remote
port. If not, take the actions
described in the Meaning or
Action column for the other
10/100/1000 Ethernet port
LED.
Interface Module
Link or
Activity
On or blinking A link is established with the
remote port and the port is
transmitting and receiving user
packets.
Off At this stage of the installation,
you have not yet cabled the
Gigabit Ethernet ports, so this
LED will be off.
After cabling this port, if this
LED is off, a link is not
established with the remote
port.
POE (if
applicable)
On – Green The port is enabled, a
power-consuming device has
been detected, and the module is
supplying power to the device.
Off The port is not providing in-line
power.
AC and DC Power Supplies
AC OK (AC
supply only)
ON – Green
(steady)
The power supply is receiving AC
power from an AC power source
OFF The power supply is not
receiving power from an AC
power source. You can do the
following:
Make sure that the power
supply cord is connected
securely to the wall outlet
and the power supply.
Make sure that the wall
outlet is rated for 115 or
120V and 20A. If it is not,
obtain a cable that is
compatibly rated for the
outlet.
Make sure that the wall
outlet has power.
TABLE 20 Desired and abnormal LED states after system power-on. (Continued)
LED Desired State Meaning Abnormal
State
Meaning or Action
Page view 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 187 188

Comments to this Manuals

No comments