Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 37)

Configuring basic device settings

30 Brocade Mobility 7131 Series Access Point Installation Guide

53-1001935-02

NOTE

Beginning with the 4.0 release of the access point firmware, a new scheme for radio

configuration and WIPS server management has been implemented within the Quick

Setup GUI applet. Up to eight radio buttons are now available (depending on the

number radios supported by the SKU). These radio buttons define how WLAN and

WIPS are supported amongst the radios available to the access point. The options

available depend strictly on the SKU supported (and are described within this

section).

To define a basic access point configuration:

1. Select System Configuration -> Quick Setup from the menu tree, if the Quick

Setup screen is not already displayed.

2. Select the System Configuration tab to define the access point’s system, WIPS

server and radio configuration.

NOTE

Beginning with the 4.0 release of the access point firmware, WIPS functionality

is no longer configured within a designated WIPS screen. The WIPS Server

designation and radio configuration is now defined as part of the access

point’s quick setup. For a description of WIPS functionality and how it relates to

access point operation, refer to the Brocade Mobility 7131 Series Access Point

Product Reference Guide available at http://www.brocade.com/support/.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 37