Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 38)

Configuring basic device settings

Brocade Mobility 7131 Series Access Point Installation Guide 31

53-1001935-02

3. Refer to the BR71xx System Settings field to define the following parameters:

a. Assign a System Name to define a title for this access point. The System

Name is useful if multiple devices are being administered.

b. Select the Country for the Mobility 7131 Series Access Point’s country of

operation. The access point prompts for the correct country code on the

first login. A warning message also displays stating an incorrect country

setting may result in illegal radio operation. Selecting the correct country is

central to legally operating the access point. Each country has its own

regulatory restrictions concerning electromagnetic emissions and the

maximum RF signal strength that can be transmitted. To ensure

compliance with national and local laws, set the country accurately. CLI

and MIB users cannot configure their access point until a two character

country code (for example, United States - us) is set. The US version of the

Brocade Mobility 7131 Series Access Point only has “US” on the country

Selection list.

c. Optionally enter the IP address of the server used to provide system time to

the access point within the Time Server field. Once the IP address is

entered, the access point’s Network Time Protocol (NTP) functionality is

engaged automatically.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 38