Brocade Communications Systems Mobility 7131 Series Installation Guide download pdf (Page 22)

Mounting the access point

Brocade Mobility 7131 Series Access Point Installation Guide 15

53-1001935-02

d. Attach the power adapter cable into the power connector on the Mobility

7131 Series Access Point.

e. Attach the power supply line cord to a power supply.

CAUTION

Do not actually connect to the power source until the cabling portion of

the installation is complete.

5. Verify the behavior of the access point LEDs. For more information, see “LED

indicators” on page 19.

6. Align the bottom of the ceiling T-bar with the back of the access point.

7. Orient the access point chassis by its length and the length of the ceiling T-bar.

8. Rotate the access point chassis 45 degrees clockwise.

9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.

10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click

as they fasten to the T-bar.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

No comments

Brocade Communications Systems Mobility 7131 Series Installation Guide Page 22