Configuring basic device settings
3
Brocade Mobility 7131 Series Access Point Installation Guide 33
53-1001935-02
CAUTION
Only a qualified installation professional should set the access point’s
radio and power management configuration.
5. Select the Quick Setup screen’s Network Configuration tab to define a
minimum set of WAN or LAN configuration values. The WAN tab displays by
default.
2.4 GHz WLAN &
5.0 GHz WLAN only -
no Sensor
Not Available Radio 1 WLAN,
Radio 2 WLAN
Radio 1 WLAN,
Radio 2 WLAN,
Radio 3 Disabled
Sensor only Spectrum
Analysis mode
(no WLAN)
Radio 1 WIPS Radio 1 WIPS,
Radio 2 WIPS
Radio 1 WIPS,
Radio 2 WIPS,
Radio 3 Disabled
2.4 GHz WLAN -
no Sensor
Radio 1 WLAN (B/G/N) Radio1 WLAN,
Radio 2 Disabled
Radio 1 WLAN,
Radio 2 Disabled,
Radio 3 Disabled
5.0 GHz WLAN -
no Sensor
Radio 1 WLAN (A/N) Radio1 Disabled,
Radio 2 WLAN
Radio 1 Disabled,
Radio 2 WLAN,
Radio 3 Disabled
Radios Off Radio 1 Disabled Radios 1 and 2
Disabled
Radios 1, 2 and 3
Disabled
Radio Button Single Radio SKU Dual Radio SKU Three Radio SKU
Comments to this Manuals