Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 188
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
26 ServerIron ADX Firewall Load Balancing Guide
53-1002436-01
Configuration examples with Layer 3 routing support
2
DRAFT: BROCADE CONFIDENTIAL
IPv4 example for FWLB with one sub-net and one virtual routing interface
The following sections show the CLI commands for configuring the basic FWLB implementation in
Figure 6.
FIGURE 6 Basic IPv4 FWLB in one subnet
Commands on the external ServerIron ADX
The following commands change the CLI to the global CONFIG level, and then change the host
name to "SI-External".
ServerIron ADX> enable
ServerIron ADX# configure terminal
ServerIron ADX(config)# hostname SI-External
The following commands configure a virtual routing interface on VLAN 1 (the default VLAN), and
then configure an IP address on the interface. The virtual routing interface is associated with all the
ports in the VLAN. In this case, because all the ServerIron ADX ports are in the default VLAN, the
virtual routing interface is associated with all the ports on the device.
SI-External(config)# vlan 1
SI-External(config-vlan-1)# router-interface ve 1
SI-External(config-vlan-1)# exit
SI-External(config)# interface ve 1
SI-External(config-ve-1)# ip address 10.10.1.111 255.255.255.0
SI-External(config-ve-1)# exit
Client
IP:10.10.1.15
Gtwy: 10.10.1.111
or 10.10.1.5
Port4/3
Port4/2
VLAN1
Virtual Interface:
10.10.1.111
Default Route: 10.10.1.5
Default Route: 10.10.2.5
VLAN1
Virtual Interface:
10.10.2.222
IP:10.10.1.6
MAC: 00.80.c8.b9.91.09
IP:10.10.2.6
MAC: 00.80.c8.b9.91.0a
Port4/2
Port 4/3
IP:10.10.2.40
Gtwy: 10.10.2.222
or 10.10.2.5
Internal
ServerIron
Port4/1
IP:10.10.2.5
MAC: 00.80.c8.b9.ab.aa
IP:10.10.1.5
MAC: 00.80.c8.b9.ab.a9
Port4/1
External
ServerIron
Server
SI-A
SI-B
Layer 3
IPv4 Firewall-1
Layer 3
IPv4 Firewall-2
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 187 188

Comments to this Manuals

No comments