Brocade Communications Systems 5300 Service Manual download pdf (Page 11)

Brocade 5300 Hardware Reference Manual xi

58-1000858-02

2. Switch Serial Number

The switch serial number and corresponding bar code are provided on the serial number label,

as illustrated below.:

The serial number label is located as follows:

• Brocade 200E—On the non-port side of the chassis

• Brocade 300, 4100, 4900, 5100, 5300, 7500, and Brocade Encryption Switch—On the

switch ID pull-out tab located inside the chassis on the port side on the left

• Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of the

switch

• Brocade 7600—On the bottom of the chassis

• Brocade 48000—Inside the chassis next to the power supply bays

• Brocade DCX—On the bottom right on the port side of the chassis

3. World Wide Name (WWN)

Use the wwn command to display the switch WWN.

If you cannot use the wwn command because the switch is inoperable, you can get the WWN

from the same place as the serial number, except for the Brocade DCX. For the Brocade DCX,

access the numbers on the WWN cards by removing the Brocade logo plate at the top of the

non-port side of the chassis.

Document feedback

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and

completeness of this document. However, if you find an error or an omission, or you think that a

topic needs further development, we want to hear from you. Forward your feedback to:

documentation@brocade.com

Provide the title and version number of the document and as much detail as possible about your

comment, including the topic heading and page number and your suggestions for improvement.

*FT00X0054E9*

FT00X0054E9

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

No comments

Brocade Communications Systems 5300 Service Manual Page 11