Brocade Communications Systems 5300 Service Manual download pdf (Page 38)

26 Brocade 5300 Hardware Reference Manual

58-1000858-02

Brocade 5300 Management

• Enter the fanShow command at the prompt:

For further information on replacing the fan assemblies, see the Brocade 5300 Fan Assembly

Replacement Procedure.

Brocade 5300 Management

You can use the management functions built into the Brocade 5300 to monitor the fabric topology,

port status, physical status, and other information to help you analyze switch performance and to

accelerate system debugging.

The Brocade 5300 automatically performs power-on self-test (POST) each time it is turned on. Any

errors are recorded in the system error log. For more information about POST, see “POST and boot

specifications” on page 22.

For information about upgrading the version of Fabric OS installed on your switch, see the Fabric

OS Administrator’s Guide.

You can manage the Brocade 5300 using any of the management options listed in Table 3.

NOTE

To achieve in-band support for IP over Fibre Channel, the software must be run on both the HBA and

the switch, and it must be supported by both the HBA and HBA driver.

br5300:admin> fanshow

Fan 1 is Ok, speed is 4821 RPM

Fan 2 is Ok, speed is 4821 RPM

Fan 3 is Ok, speed is 4891 RPM

br5300:admin>

TABLE 3 Management Options for the Brocade 5300 Switch

Management Tool Out-of-band Support In-band Support

Command line interface (CLI)

Up to two admin sessions and four user sessions simultaneously.

For more information, refer to the Fabric OS Administrator’s Guide

and the Fabric OS Command Reference Manual.

Ethernet or serial

connection

IP over Fibre Channel

Brocade Web Tools

For information, refer to the Web Tools Administrator’s Guide.

Ethernet or serial

connection

IP over Fibre Channel

Standard SNMP applications

For information, refer to the MIB Reference Manual.

Ethernet or serial

connection

IP over Fibre Channel

Brocade Fabric Manager (option to purchase)

For information, refer to the Fabric Manager Administrator’s Guide.

Ethernet or serial

connection

IP over Fibre Channel

Management Server

For information, refer to the Fabric OS Administrator’s Guide and

the Fabric OS Command Reference Manual.

Ethernet or serial

connection

Native in-band

interface

(over HBA only)

EFCM (option to purchase)

For information, refer to theEFCM documentation set.

Ethernet or serial

connection

IP over Fibre Channel

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Comments to this Manuals

No comments

Brocade Communications Systems 5300 Service Manual Page 38

Comments to this Manuals

Related products and manuals for Network switches Brocade Communications Systems 5300