Brocade Communications Systems 5300 Service Manual Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
28 Brocade 5300 Hardware Reference Manual
58-1000858-02
Weight and physical dimensions
A
Weight and physical dimensions
Table 4 lists the weight and dimensions of the Brocade 5300.
Facility requirements
Table 5 provides the facilities requirements that must be met for the Brocade 5300.
Power supply specifications
The power supplies are universal and capable of functioning worldwide without voltage jumpers or
switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of
accommodating input voltages and line frequencies. Each power supply has a built-in fan for
cooling, pushing air towards the port side of the switch.
Table 6 lists the power supply specifications for the Brocade 5300.
TABLE 4 Physical specifications
Dimension Value
Height 2U or 8.6 cm (3.4 in.)
Depth 61 cm (24 in.)
Width 42.8 cm (16.8 in.)
Weight (with two power supplies, three fan assemblies,
and zero SFPs installed)
15.6 kg (34.4 lb)
TABLE 5 Facility Requirements
Type Requirements
Electrical Primary AC input 100-240 VAC, 2.0A, 47-63 Hz; switch autosenses input voltage
Adequate supply circuit, line fusing, and wire size, as specified by the electrical rating
on the switch nameplate
Circuit protected by a circuit breaker and grounded in accordance with local electrical
codes
Refer to Table 6 on page 28 for complete power supply specifications.
Thermal
A minimum air flow of 79.8 cubic meters/hour (47 cubic ft/min.) available in the
immediate vicinity of the switch
Ambient air temperature not exceeding 40° C (104° F) while the switch is operating
Cabinet (when
rack-mounted)
Two rack units (2U) in a 48.3 cm (19-inches) cabinet
All equipment in cabinet grounded through a reliable branch circuit connection
Additional weight of switch not to exceed the cabinet’s weight limits
Cabinet secured to ensure stability in case of unexpected movement
TABLE 6 Power Supply Specifications
Specification Value
Inlet C13
Maximum output of one power supply 300 Watts
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 51 52

Comments to this Manuals

No comments