Brocade Communications Systems 6510 Installation Guide download pdf (Page 49)

Brocade 6510 Switch Technical Specifications

This document highlights the features and specifications for the Brocade 6510 switch.

System specifications

System component Description

Enclosure 1U, non-port side front-to-back exhaust airflow, power from back

Power inlet C14

Power supplies Dual, hot-swappable redundant power supplies with integrated system cooling fans

Fans Two fans per FRU

Cooling Port side to the non-port side of the switch (non-port side exhaust) and non-port side

to the port side (port side exhaust)

System architecture Nonblocking shared memory switch

System processors PowerPC 440EPx @ 667 MHz

Port-to-port latency <700 nanoseconds with no contention (destination port is free)

Fibre Channel

System component Description

Fibre Channel ports SFP+ optical transceivers that support any combination of Short Wavelength (SWL)

and Long Wavelength (LWL) or Extended Long Wavelength (ELWL) optical media

among the switch ports.

Capable of operating at 2, 4, 8, or 16 Gbps depending on SFP+ models and able to

auto-negotiate to the maximum link speed.

• 2, 4, and 8 Gbps performance is enabled by 8 Gbps SFP+ transceivers.

• 4, 8, and 16 Gbps performance is enabled by 16 Gbps SFP+ transceivers.

ANSI Fibre Channel

protocol

FC-PH (Fibre Channel Physical and Signaling Interface standard)

Modes of operation Fibre Channel Class 2 and Class 3

Fabric initialization Complies with FC-SW-3 Rev. 6.6

Brocade 6510 Hardware Installation Guide 49

53-1002174-10

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

No comments

Brocade Communications Systems 6510 Installation Guide Page 49