Brocade Communications Systems Mobility 7131 Series Service Manual download pdf (Page 107)

Brocade Mobility 7131 Access Point Product Reference Guide 95

53-1002517-01

4. Click Apply to save any changes to the SNMP Trap Configuration screen. Navigating away from

the screen without clicking the Apply button results in all changes being lost.

5. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the

settings displayed on SNMP Trap Configuration screen to the last saved configuration.

6. Click Logout to securely exit the Mobility 7131 Access Point Access Point applet. A prompt

displays confirming the logout before the applet is closed.

Configuring Specific SNMP Traps

Use the SNMP Traps screen to enable specific traps on the Mobility 7131 Access Point. Brocade

Mobility recommends defining traps to capture unauthorized devices operating within the Mobility

7131 Access Point coverage area. Trap configuration depends on the network machine that

receives the generated traps. SNMP v1/v2c and v3 trap configurations function independently. In a

mixed SNMP environment, traps can be sent using configurations for both SNMP v1/v2c and v3. To

configure specific SNMP traps on the Mobility 7131 Access Point:

1. Select System Configuration - > SNMP Access - > SNMP Traps from the menu tree.

Port Specify a destination User Datagram Protocol (UDP) port for receiving traps.

Username Enter a username specific to the SNMP-capable client receiving the traps.

Security Level Use the

Security Level drop-down menu to specify a security level of noAuth (no

authorization), AuthNoPriv (authorization without privacy), or AuthPriv (authorization with

privacy).

The “NoAuth” setting specifies no login authorization or encryption for the user. The

“AuthNoPriv” setting requires login authorization, but no encryption. The “AuthPriv” setting

requires login authorization and uses the Data Encryption Standard (DES).

Passwords Select

Passwords to display the Password Settings screen for specifying

authentication and password settings for an SNMP v3 user. The maximum password length

is 11 characters. Use the

Authentication Algorithm drop-down menu to specify MD5 or

SHA1 as the authentication algorithm. Use the Privacy Algorithm drop-down menu to

define an algorithm of

DES or AES-128bit.

If entering the same username on the SNMP Traps and SNMP Access screens, the

password entered on the SNMP Traps page overwrites the password entered on the SNMP

Access page. To avoid this problem, enter the same password on both pages.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 519 520

No comments

Brocade Communications Systems Mobility 7131 Series Service Manual Page 107