Brocade Communications Systems Mobility 7131 Series Service Manual download pdf (Page 167)

Brocade Mobility 7131 Access Point Product Reference Guide 155

53-1002517-01

8. Refer to the Radius Configuration field to define a primary and secondary Radius server port

and shared secret password.

9. Click OK to save any changes to the Hotspot Configuration screen. Navigating away from the

screen without clicking Apply results in all changes to the screens being lost.

10. Click Cancel (if necessary) to undo any changes made. Cancel reverts the settings displayed on

the Hotspot Configuration screen to the last saved configuration.

Defining the Hotspot White List

To host a Login, Welcome or Fail page on the external Web server, the IP address of that Web server

should be in access point’s White List.

NOTE

If using an external Web Server over the WAN port, and the hotspot’s HTTP pages (login or welcome)

redirect to the access point’s WAN IP address for CGI scripts, the IP address of the external Web

server and the access point’s WAN IP address should be entered in the White List.

Shared Secret Specify a shared secret for accounting authentication for the hotspot. The shared secret is

required to match the shared secret on the external Radius accounting server.

Timeout Set the timeout value in seconds (1-255) used to timeout users accessing the Radius

Accounting server if they have not successfully accessed the Accounting Server.

Retries Define the number of retries (1-10) the user is allowed to access the Radius Accounting

Server if the first attempt fails.

The default is 1.

Enable Radius

Authentication

Select the

Enable Radius Authentication checkbox to enable use of a RADIUS

Authentication Server for authentication of hotspot users. Disable this to use an external

server for authentication or use a hotspot without authentication.

Select mode Use the

Select mode drop-down menu to define whether an Internal or External server is

to be used for the primary server.

Pri Server IP Define the IP address of the primary Radius server. This is the address of your first choice

for Radius server.

Pri Port Enter the TCP/IP port number for the server acting as the primary Radius server. The

default port is 1812.

Pri Secret Enter the shared secret password used with the primary Radius Server.

Sec Server IP Define the IP address of the secondary Radius server. This is the address of your second

choice for Radius server.

Sec Port Enter the TCP/IP port number for the server acting as the secondary Radius server. The

default port is 1812.

Sec Secret Enter the shared secret password used with the secondary Radius Server.

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 519 520

No comments

Brocade Communications Systems Mobility 7131 Series Service Manual Page 167