310 Brocade Mobility 7131 Access Point Product Reference Guide
53-1002517-01
8
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page
6-216.
br7131>admin(network.wan.vpn)>delete
Description:
Deletes VPN tunnel entries.
Syntax:
Example:
admin(network.wan.vpn)>list
--------------------------------------------------------------------------
Tunnel Name Type Remote IP/Mask Remote Gateway Local WAN IP
--------------------------------------------------------------------------
remidtype <name> <idtype> Sets the Remote ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (
IP, FQDN, or
UFQDN).
myiddata <name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required when the
ID type is set to IP.
remiddata <name> <idtype> Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required when the
ID type is set to IP.
authtype <name> <authtype> Sets the IKE Authentication type for <name> to
<authtype> (
PSK or RSA).
authalgo <name> <authalgo> Sets the IKE Authentication Algorithm for <name> to
MD5 or SHA1.
phrase <name> <phrase> Sets the IKE Authentication passphrase for <name> to
<phrase>.
encalgo <name> <encalgo> Sets the IKE Encryption Algorithm for <name> to
<encalgo> (one of
DES, 3DES, AES128, AES192, or
AES256).
lifetime <name> <lifetime> Sets the IKE Key life time in seconds for <name> to
<lifetime>.
group <name> <group> Sets the IKE Diffie-Hellman Group for <name> to either
G768 or G1024.
delete all
Deletes all VPN entries.
<name>
Deletes VPN entries <name>.
Comments to this Manuals