Brocade Communications Systems Mobility 7131 Series Service Manual Page 333

  • Download
  • Add to my manuals
  • Print
  • Page
    / 520
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 332
Brocade Mobility 7131 Access Point Product Reference Guide 321
53-1002517-01
8
br7131>admin(network.wireless.wlan)>create
Description:
Defines the parameters of a new WLAN.
Syntax:
Example:
admin(network.wireless.wlan.create)>show wlan
ESS Identifier :
WLAN Name :
create
show wlan <number> Displays newly created WLAN and policy number.
set ess
<essid> Defines the ESSID for a target WLAN.
wlan-name
<name> Determines the name of this particlular WLAN
(1-32).
5.0GHz
<mode> Enables or disables access to the Mobility 7131
Access Point 5.0 GHz radio.
2.4Ghz
<mode> Enables or disables access to the Mobility 7131
Access Point 2.4 GHz radio.
mesh
<mode> Enables or disables the Client Bridge Mesh
Backhaul option.
hotspot
<mode> Enables or disables the Hotspot mode.
max-mu
<number> Defines the maximum number of MU able to
operate within the WLAN (default = 127 MUs).
idle- timeout
<minutes> Sets the interval the access point uses to timeout
idle MUs from WLAN inclusion. Set between 1
-65532 minutes. Default is 30 minutes.
security
<name> Sets the security policy to the WLAN (1-32).
acl
<name> Sets the MU ACL policy to the WLAN (1-32).
passwd
<ascii string> Defines a Kerberos password used if the WLAN’s
security policy uses a Kerberos server-based
authentication scheme.
no-mu-mu
<mode> Enables or disables MUs associated to the same
WLAN to not communicate with each other.
sbeacon <mode> Enables or disables the AP from transmitting the
ESSID in the beacon.
bcast
<mode> Enables or disables the Mobility 7131 Access
Point from accepting broadcast IDs from MUs.
Broadcast IDs are transmitted without security.
qos
<name> The index name representing the QoS policy used
with this WLAN.
add-wlan Apply the changes to the modified WLAN and exit.
rate-limiting <mode> Enables or disables MU Rate Limiting
limit w2wl <rate limit> Sets the per-mu rate limit in kb (in the
wired-to-wireless direction)
limit wl2w <rate limit> Sets the per-mu rate limit in kb (in the
wireless-to-wired direction)
Page view 332
1 2 ... 328 329 330 331 332 333 334 335 336 337 338 ... 519 520

Comments to this Manuals

No comments