Brocade Communications Systems Mobility 7131 Series Service Manual Page 393

  • Download
  • Add to my manuals
  • Print
  • Page
    / 520
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 392
Brocade Mobility 7131 Access Point Product Reference Guide 381
53-1002517-01
8
admin(system)>set name phils
admin(system)>set loc engineering
admin(system)>set email [email protected]
admin(system)>set cc us
admin(system)>set sslv2 enable
admin(system)>set weak-ssl-cipher enable
admin(system)>set sshv1 enable
admin(system)>set dns-relay-mode enable
NOTE
This name will appear in the WIPS server when one of the radios is configured as a sensor and the
WIPS functionality connects to the WIPS server. The WIPS module only accepts names with up to 20
characters, keep that if intending to use this AP as a sensor.
For information on configuring System Settings using the applet (GUI), see Configuring System
Settings on page 4-67. Refer to Appendix A for information on the two-character country codes.
br7131>admin(system)>lastpw
Description:
Displays last expired debug password.
Example:
admin(system)>lastpw
AP-713X MAC Address is 00:15:70:02:7A:66
Last debug password was admin123
Current debug password used 0 times, valid 4 more time(s)
admin(system)>
br7131>admin(system)>arp
Description:
Dispalys the access point’s arp table.
Example:
admin(system)>arp
IP Address HWtype HWaddress Flags Mask Device
cc <code> Sets the Mobility 7131 Access Point country code using two letters <code>.
led <mode> Sets the access point’s LED state.
dns-relay-mode <mode> Enables/disables DNS relay to prevent access to the port used by DNS.
sslv2 <mode> Enables/disables SSLv2 support for encryption and message authentication.
weak-ssl-cipher <mode> Enables/disables the AP to support SSL ciphers less than 128 bits in length.
sshv1 <mode> Enables/disables SSHv1 support for remote connections.
Page view 392
1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 519 520

Comments to this Manuals

No comments