Brocade Communications Systems NetIron CER Series Installation Guide download pdf (Page 85)

FIGURE 50 Removing the power supply from the device

5. Continue to pull the power supply until it is removed from the device.

6. Place the power supply in an anti-static bag for storage.

7. Insert a new supply, or place and screw in a cover plate over the empty power supply. Refer to

Installing the AC power supply on page 85 for details.

Installing the AC power supply

Perform the following steps to install an AC power supply.

1. Remove the power supply or cover plate currently in the power supply bay you wish to install the

power supply in. Refer to Removing the AC power supply on page 83 for details.

2. Remove the new power supply from its packaging.

3. With one hand, support the underside of the power supply and insert the power supply into the empty

power supply slot. Press until the supply is completely in the slot, so that the connectors on the back

of the supply are fully engaged with the pins on the power backplane.

Installing the AC power supply

Brocade NetIron CES 2000 Series and NetIron CER 2000 Series Hardware Installation Guide 85

53-1003263-02

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 119 120

No comments

Brocade Communications Systems NetIron CER Series Installation Guide Page 85