Brocade Communications Systems VDX 8770-8 Installation Guide Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 116
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
NOTE
Review and follow ESD precautions on page 69 before removing a switch fabric module..
Complete the following steps to remove a switch fabric module. Refer to the illustration provided with
the procedure.
1. Unscrew the power enable pin.
2. Loosen the two screws on the slider using the Phillips screwdriver if necessary.
3. Pull out the pin and move the slider all the way up, exposing the captive screw.
4. Unscrew the two captive screws using the Phillips screwdriver.
5. Open the ejectors by rotating them toward the center of the module face. Pull the switch fabric
module out of the chassis using the ejectors.
FIGURE 24 Removal and replacement of the switch fabric module
Replacing a switch fabric module
Complete the following steps to insert the switch fabric module . Refer to the illustration provided with
the procedure.
NOTE
Review and follow ESD precautions on page 69 before removing a switch fabric module..
Replacing a switch fabric module
78 Brocade VDX 8770-8 Hardware Installation Guide
53-1002564-07
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 115 116

Comments to this Manuals

No comments