Brocade Communications Systems Brocade Superx Series Installation Guide Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 188
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
Brocade FastIron SX Series Chassis Hardware Installation Guide 23
53-1002500-01
Hardware features
1
FIGURE 15 IPv6 100/1000 hybrid fiber interface module front panel
The front panel contains the following control features:
24 Gigabit Ethernet fiber ports
24 LEDs
The ports on the 24-port 100/1000 Gigabit Ethernet hybrid fiber module operate at a fixed speed
of 100 or 1000 Mbps (they do not support 10 Mbps connections), and use auto-negotiation to
automatically configure the highest performance mode with the connected device.
The mini-GBIC slots support the 100Base and 1000Base fiber cabling listed in “Network
interfaces” on page 25.
Support for 100Base-FX on the 100/1000 interface module
The 24-port 100/1000 fiber interface module supports the following types of SFPs for 100Base-FX:
Multimode SFP – maximum distance is 2 kilometers
Bidirectional single mode SFP – maximum distance is 10 kilometers
Long Reach (LR) – maximum distance is 40 kilometers
Intermediate Reach (IR) – maximum distance is 15 kilometers
To enable support for 100BaseFX, you must enter the CLI command 100-fx at the interface level of
the CLI. For CLI command details, refer to the section “Enabling and Disabling Support for
100BaseFX” in the FastIron Configuration Guide.
2-port 10-Gigabit Ethernet interface modules
2-port 10-Gigabit Ethernet interface modules have two physical ports, through which you can
connect the Brocade device to other network devices at a speed of 10 Gigabits per second.
The modules have two optical interfaces with LC connectors for 10-Gigabit Samll Form Factor
Pluggable (SFP+) MSA-compliant transceivers. On IPv4 2-port 10-Gigabit Ethernet interface
modules and the IPv6 2-port 10-Gigabit Ethernet interface modules (these modules support either
IPv4 or IPv6 exclusively), the transceivers support 10GBase-SR, 10GBase-LR, and 10GBase-ER
fiber optic cabling for LAN PHY or WAN PHY (LAN or WAN module only). On 2-port 10-Gigabit
Ethernet interface modules supporting both IPv4 and IPv6, the transceivers support 10GBase-SR,
10GBase-LR, and 10GBase-ER fiber optic cabling for LAN.
1Port 1 13 Port 13
2Port 2 24 Port 24
SX
624HF
2 24
1
13
3
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 187 188

Comments to this Manuals

No comments