Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual download pdf (Page 163)

152 ServerIron ADX Firewall Load Balancing Guide

53-1002436-01

Supporting dual homed servers in FWLB design

DRAFT: BROCADE CONFIDENTIAL

SI-Int-B(config-fw-2)# exit

SI-Int-B(config)# vlan 1

SI-Int-B(config-vlan-1)# static-mac-address 00e0.5201.042e ethernet 3/2

priority 1 router-type

SI-Int-B(config-vlan-1)# static-mac-address 00e0.5201.2188 ethernet 4/1

priority 1 router-type

SI-Int-B(config-vlan-1)# exit

SI-Int-B(config)# write memory

Supporting dual homed servers in FWLB design

In Figure 23, the internal server is dual homed and uses active-standby NICs. VRRP Extended

(VRRP-E) is configured on both Internal ServerIron ADX A and Internal ServerIron ADX B. Internal

ServerIron A is the VRRP-E master, while internal ServerIron B is the VRRP-E backup. (Refer to the

"Configuring VRRP and VRRP-E" chapter of the ServerIron ADX Switch and Router Guide for

information on VRRP-E.)

The server NIC that connects to the VRRP-E master ServerIron ADX is active and the one that

connects to the VRRP-E backup ServerIron ADX is standby.

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 187 188

No comments

Brocade Communications Systems ServerIron ADX 12.4.00 Service Manual Page 163